Global patterns of human exposure to flame retardants indoors.

To fill the knowledge gaps regarding the global patterns of human exposure to flame retardants (FRs) (i.e., brominated flame retardants (BFRs) and organophosphorus flame retardants (OPFRs)), data on the levels and distributions of FRs in external and internal exposure mediums, including indoor dust, indoor air, skin wipe, serum and urine, were summarized and analysed. Comparatively, FR levels were relatively higher in developed regions in all mediums, and significant positive correlations between FR contamination and economic development level were observed in indoor dust and air. Over time, the concentration of BFRs showed a slightly decreasing trend in all mediums worldwide, whereas OPFRs represented an upward tendency in some regions (e.g., the USA and China). The occurrence levels of FRs and their metabolites in all external and internal media were generally correlated, implying a mutual indicative role among them. Dermal absorption generally contributed >60% of the total exposure of most FR monomers, and dust ingestion was dominant for several low volatile compounds, while inhalation was found to be negligible. The high-risk FR monomers (BDE-47, BDE-99 and TCIPP) identified by external exposure assessment showed similarity to the major FRs or metabolites observed in internal exposure mediums, suggesting the feasibility of using these methods to characterize human exposure and the contribution of indoor exposure to the human burden of FRs. This review highlights the significant importance of exposure assessment based on multiple mediums for future studies.

Evaluation of universal preenrichment broth and comparison of rapid molecular methods for the detection of Salmonella from spent sprout irrigation water (SSIW).

Sprouts and spent sprout irrigation water (SSIW) present unique challenges for the development of a Salmonella detection method in food matrices. This study aimed to compare universal preenrichment broth (UPB) and lactose broth (LB) as preenrichment media for cultural and rapid screening methods and to compare their abilities to recover Salmonella in SSIW samples from different sprout varieties (i.e., alfalfa, broccoli, and mung bean sprouts). The associated co-enriched microbiota with different sprout varieties using different preenrichment media were also examined using a quasi-metagenomic approach. The performance of media and detection methods was compared using the relative level of detection (RLOD) value, as recommended by ISO 16140-2:2016. The level of detection (LOD) for Salmonella culture method with UPB was similar to that with LB in low aerobic plate count (APC) background samples (the relative LOD, i.e., RLOD, was nearly 1 after adjusting for the effects of SSIW variety and serovar), but significantly lower than that with LB in high APC background samples (RLOD = 0.32). The LOD for Salmonella with selected rapid methods was comparable to each other (RLOD from 0.97 to 1.50) and to the culture method (RLOD from 0.69 to 1.03), and no significant difference was detected between preenrichment broths in low APC background samples with RLOD values between 0.76 and 1.04. In samples with a high APC background, however, a drastic difference in LOD was observed between methods and between preenrichment broths for each method. The RLOD ranged from 0.03 to 0.32 when UPB was compared to LB as preenrichment broth. The composition and relative abundance (RA) of co-enriched microbiota was affected by multiple factors including food matrices, preenrichment media and Salmonella contamination. Altogether, this study validated UPB as a better preenrichment broth than LB for the detection of Salmonella enterica from SSIW. This study also suggested UPB may also be an optimal preenrichment medium for rapid screening methods when APC level is high. The observation of potential exclusion of Salmonella in preenrichment through the overgrowth of competitive microflora from the quasi-metagenomic study provided novel information that may be used to further optimize preenrichment formulations.

Screening of volatile organic compounds (VOCs) from liquid fungal cultures using ambient mass spectrometry.

The potential of fungi for use as biotechnological factories in the production of a range of valuable metabolites, such as enzymes, terpenes, and volatile aroma compounds, is high. Unlike other microorganisms, fungi mostly secrete secondary metabolites into the culture medium, allowing for easy extraction and analysis. To date, the most commonly used technique in the analysis of volatile organic compounds (VOCs) is gas chromatography, which is time and labour consuming. We propose an alternative ambient screening method that provides rapid chemical information for characterising the VOCs of filamentous fungi in liquid culture using a commercially available ambient dielectric barrier discharge ionisation (DBDI) source connected to a quadrupole-Orbitrap mass spectrometer. The effects of method parameters on measured peak intensities of a series of 8 selected aroma standards were optimised with the best conditions being selected for sample analysis. The developed method was then deployed to the screening of VOCs from samples of 13 fungal strains in three different types of complex growth media showing clear differences in VOC profiles across the different media, enabling determination of best culturing conditions for each compound-strain combination. Our findings underline the applicability of ambient DBDI for the direct detection and comparison of aroma compounds produced by filamentous fungi in liquid culture.

Prediction model for day 3 embryo implantation potential based on metabolites in spent embryo culture medium.

BACKGROUND: Metabolites in spent embryo culture medium correlate with the embryo's viability. However, there is no widely accepted method using metabolite dada to predict successful implantation. We sought to combine metabolomic profiling of spent embryo culture medium and clinical variables to create an implantation prediction model as an adjunct to morphological screening of day 3 embryos. METHODS: This investigation was a prospective, nested case-control study. Forty-two day 3 embryos from 34 patients were transferred, and the spent embryo culture medium was collected. Twenty-two embryos implanted successfully, and the others failed. Metabolites in the medium relevant to implantation were detected and measured by Liquid Chromatography-Mass Spectrometry. Clinical signatures relevant to embryo implantation were subjected to univariate analysis to select candidates for a prediction model. Multivariate logistical regression of the clinical and metabolomic candidates was used to construct a prediction model for embryo implantation potential. RESULTS: The levels of 13 metabolites were significantly different between the successful and failed groups, among which five were most relevant and interpretable selected by Least Absolute Shrinkage and Selection Operator regression analysis. None of the clinical variables significantly affected day 3 embryo implantation. The most relevant and interpretable set of metabolites was used to construct a prediction model for day 3 embryo implantation potential with an accuracy of 0.88. CONCLUSIONS: Day 3 embryos'implantation potential could be noninvasively predicted by the spent embryo culture medium's metabolites measured by LC-MS. This approach may become a useful adjunct to morphological evaluation of day 3 embryos.

Tea contamination by mycotoxins and azole-resistant mycobiota - The need of a One Health approach to tackle exposures.

Despite tea beneficial health effects, there is a substantial risk of tea contamination by harmful pathogens and mycotoxins. A total of 40 tea samples (17 green (raw) tea; 13 black (fermented) tea; 10 herbal infusions or white tea) were purchased from different markets located in Lisbon district during 2020. All products were directly available to consumers either in bulk (13) and or in individual packages (27). Bacterial analysis was performed by inoculating 150 µL of samples extracts in tryptic soy agar (TSA) supplemented with 0.2 % nystatin medium for mesophilic bacteria, and in Violet Red bile agar (VRBA) medium for coliforms (Gram-negative bacteria). Fungal research was performed by spreading 150 µL of samples in malt extract agar (MEA) supplemented with 0.05 % chloramphenicol and in dichloran-glycerol agar (DG18) media. The molecular detection of the Aspergillus sections Fumigati, Nidulantes, Circumdati and Flavi was carried out by Real Time PCR (qPCR). Detection of mycotoxins was performed using high performance liquid chromatograph (HPLC) with a mass spectrometry detector. Azole resistance screening was achieved following the EUCAST guidelines. The highest counts of total bacteria (TSA) were obtained in green raw tea (81.6 %), while for coliform counts (VRBA) were found in samples from black raw tea (96.2 %). The highest fungal counts were obtained in green raw tea (87.7 % MEA; 69.6 % DG18). Aspergillus sp. was the most prevalent genus in all samples on MEA (54.3 %) and on DG18 (56.2 %). In the raw tea 23 of the samples (57.5 %) presented contamination by one to five mycotoxins in the same sample. One Aspergillus section Fumigati isolate from green tea beverage recovered form itraconazole-Sabouraud dextrose agar (SDA) medium, presented itraconazole and posaconazole E-test MICs above MIC90 values. Our findings open further discussion regarding the One-Health approach and the necessary investment in researching biological hazards and azole-resistance associated with the production and consumption of tea (in particular green tea).

Polyhydroxyalkanoates production from short and medium chain carboxylic acids by Paracoccus homiensis.

The aim of this study was to evaluate an effect of short and medium chain carboxylic acids (CAs) rich stream derived from acidogenic mixed culture fermentation of acid whey on polyhydroxyalkanoates (PHAs) synthesis by Paracoccus homiensis and compare it with the impact of individual synthetic CAs. The obtained results confirmed that the analyzed bacterium is able to metabolize synthetic CAs as the only carbon sources in the growth medium with maximum PHAs production yields of 26% of cell dry mass (CDM). The replacement of the individual CAs by a CAs-rich residual stream was found to be beneficial for the Paracoccus homiensis growth. The highest biomass concentration reached about 2.5 g/L with PHAs content of 17% of CDM. The purified PHAs were identified as poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by applying gas chromatography coupled with mass spectrometry, Fourier transform infrared spectroscopic spectra and UV-Vis spectra. Furthermore, a differential scanning calorimetric, thermogravimetric and water contact angle analysis proved that the extracted copolymers have useful properties. The obtained data are promising in the perspective of developing a microbial PHAs production as a part of an integrated valorization process of high CAs content waste-derived streams.

Occurrence, congener patterns, and potential ecological risk of chlorinated paraffins in sediments of Yangtze River Estuary and adjacent East China Sea.

Chlorinated paraffins (CPs) are high production volume chemicals with immense scientific research interest due to their wide distribution, persistence, toxicity, and bioaccumulation potential. In this study, 87 surface sediments were collected from the Yangtze River Estuary (YRE) and the adjacent East China Sea (ECS). We investigated the concentrations, spatial distribution, and composition profiles of short-chain chlorinated paraffins (SCCPs) and medium-chain chlorinated paraffins (MCCPs) using ultra-high-performance liquid chromatography coupled with Orbitrap Fusion Tribrid mass spectrometry. The sedimentary concentrations of SCCPs and MCCPs ranged from 2.85 to 94.7 ng·g-1 (median 13.7 ng·g-1) and 3.33 to 77.8 ng·g-1 (median 13.3 ng·g-1), respectively. Higher CP concentrations were found in YRE sediments. The values decreased away from the location, implying a direct influence of the Yangtze River. The SCCP concentrations were higher than those of MCCPs in most sediment samples. Overall, the predominant homologs were C13Cl5-7 and C14Cl6-8 for MCCPs and SCCPs, respectively. Overall, the sediment-dwelling organisms in the region are susceptible to low ecological risks.

Sequencing SARS-CoV-2 from antigen tests.

Genomic surveillance empowers agile responses to SARS-CoV-2 by enabling scientists and public health analysts to issue recommendations aimed at slowing transmission, prioritizing contact tracing, and building a robust genomic sequencing surveillance strategy. Since the start of the pandemic, real time RT-PCR diagnostic testing from upper respiratory specimens, such as nasopharyngeal (NP) swabs, has been the standard. Moreover, respiratory samples in viral transport media are the ideal specimen for SARS-CoV-2 whole-genome sequencing (WGS). In early 2021, many clinicians transitioned to antigen-based SARS-CoV-2 detection tests, which use anterior nasal swabs for SARS-CoV-2 antigen detection. Despite this shift in testing methods, the need for whole-genome sequence surveillance remains. Thus, we developed a workflow for whole-genome sequencing with antigen test-derived swabs as an input rather than nasopharyngeal swabs. In this study, we use excess clinical specimens processed using the BinaxNOW™ COVID-19 Ag Card. We demonstrate that whole-genome sequencing from antigen tests is feasible and yields similar results from RT-PCR-based assays utilizing a swab in viral transport media.

Modular development enables rapid design of media for alternative hosts.

Developing media to sustain cell growth and production is an essential and ongoing activity in bioprocess development. Modifications to media can often address host or product-specific challenges, such as low productivity or poor product quality. For other applications, systematic design of new media can facilitate the adoption of new industrially relevant alternative hosts. Despite manifold existing methods, common approaches for optimization often remain time and labor-intensive. We present here a novel approach to conventional media blending that leverages stable, simple, concentrated stock solutions to enable rapid improvement of measurable phenotypes of interest. We applied this modular methodology to generate high-performing media for two phenotypes of interest: biomass accumulation and heterologous protein production, using high-throughput, milliliter-scale batch fermentations of Pichia pastoris as a model system. In addition to these examples, we also created a flexible open-source package for modular blending automation on a low-cost liquid handling system to facilitate wide use of this method. Our modular blending method enables rapid, flexible media development, requiring minimal labor investment and prior knowledge of the host organism, and should enable developing improved media for other hosts and phenotypes of interest.

Mg, K-containing microparticle: A possible active principle of a culture extract produced by a microbial consortium.

A synthetic microbial consortium called Effective Microorganisms (EM) consists mainly of photosynthetic bacteria, lactic acid bacteria and yeast. Various effects of EM∙XGOLD, a health drink produced by EM, on life cycle of Dictyostelium discoideum were described previously. Here, we report our attempt to identify the active principle, termed EMF, that brought about the observed effects. Throughout the purification processes, the presence of the active principle was monitored by promoted fruiting body formation. By liquid-liquid separation the activity was recovered in aqueous phase, which, after concentration, was further subjected to reverse-phase column chromatography. No activity was detected in any eluant, while almost all the activity was recovered in residual insoluble material. The application of conventional organic chemistry procedures to the residual fraction did not lead to any informative results. Acid treatment of the insoluble material produced air bubbles, suggesting it to be composed of some inorganic carbonate. Viewed under scanning electronmicroscope, the residue revealed spherical particles of µm size range. Energy Dispersive X-ray (EDX) Spectroscopy pointed to the existence, on the surface of the particles, of magnesium and, to a certain extent, of potassium. In separate experiments, acid treatment and alkali neutralization of EM∙XGOLD completely wiped out the stimulatory activity of fruiting body formation. These lines of evidence indicate these Mg, K-containing microparticles to be an active principle of EM culture extract. How these particles exert their effect is currently under intensive investigation.

Quantitative flow chamber system for evaluating in vitro biofilms and the kinetics of S. aureus biofilm formation in human plasma media.

BACKGROUND: It has been well established that biofilm formation on orthopaedic implants is a critical event in the pathogenesis of orthopaedic infections, yet the natural history of this process with respect to bacterial adhesion, proliferation, and glycocalyx matrix production remains poorly understood. Moreover, there are no quantitative methods yet available to assess the differences in biofilm formation between different bacterial strains or implant materials. Consequently, this study aimed to investigate the natural history of S. aureus in in vitro biofilm formation in human plasma media using a flow chamber system. Bioluminescent S. aureus strains were used to better understand the bacterial growth and biofilm formation on orthopaedic materials. Also, the effects of human plasma media were assessed by loading the chamber with Tryptic Soy Broth with 10% human plasma (TSB + HP). RESULTS: Scanning electron microscopy (SEM) was utilized to assess the morphological appearance of the biofilms, revealing that S. aureus inoculation was required for biofilm formation, and that the phenotypes of biofilm production after 24 h inoculation with three tested strains (SH1000, UAMS-1, and USA300) were markedly different depending on the culture medium. Time course study of the bioluminescence intensity (BLI) and biofilm production on the implants due to the UAMS-1 and USA300 strains revealed different characteristics, whereby UAMS-1 showed increasing BLI and biofilm growth until peaking at 9 h, while USA300 showed a rapid increase in BLI and biofilm formation at 6 h. The kinetics of biofilm formation for both UAMS-1 and USA300 were also supported and confirmed by qRT-PCR analysis of the 16S rRNA gene. Biofilms grown in our flow chamber in the plasma media were also demonstrated to involve an upregulation of the biofilm-forming-related genes icaA, fnbA, and alt. The BLI and SEM results from K-wire experiments revealed that the in vitro growth and biofilm formation by UAMS-1 and USA300 on stainless-steel and titanium surfaces were virtually identical. CONCLUSION: We demonstrated a novel in vitro model for S. aureus biofilm formation with quantitative BLI and SEM outcome measures, and then used this model to demonstrate the presence of strain-specific phenotypes and its potential use to evaluate anti-microbial surfaces.

Macrophage Polarization Related to Crystal Phases of Calcium Phosphate Biomaterials.

Calcium phosphate (CaP) materials influence macrophage polarization during bone healing. However, the effect of the crystal phase of CaP materials on the immune response of bone remains unclear. In this study, the effect of the crystal phases of CaP materials on the regulation of macrophage polarization was investigated. Human THP-1 cells and mouse RAW 264 cells were cultured with octacalcium phosphate (OCP) and its hydrolyzed form Ca-deficient hydroxyapatite to assess the expression of pro-inflammatory M1 and anti-inflammatory M2 macrophage-related genes. OCP inhibited the excessive inflammatory response and switched macrophages to the anti-inflammatory M2 phenotype, which promoted the expression of the interleukin 10 (IL10) gene. In contrast, HL stimulated an excessive inflammatory response by promoting the expression of pro-inflammatory M1 macrophage-related genes. To observe changes in the microenvironment induced by OCP and HL, inorganic phosphate (Pi) and calcium ion (Ca2+) concentrations and pH value in the medium were measured. The expression of the pro-inflammatory M1 macrophage-related genes (tumor necrosis factor alpha (TNFα) and interlukin 1beta (IL1ß)) was closely related to the increase in ion concentration caused by the increase in the CaP dose. Together, these results suggest that the microenvironment caused by the crystal phase of CaP materials may be involved in the immune-regulation capacity of CaP materials.

Oxytocin stimulates lipolysis, prostaglandin E2 synthesis, and leptin secretion in 3T3-L1 adipocytes.

A model of oxytocin in the regulation of metabolic status has described one of oxytocin synthesis and release from the neurohypophysis in response to leptin, to suppress further leptin release. In addition, a lipogenic role for oxytocin has been suggested, consistent with an insulinergic action. This model, however, may be incorrect. Oxytocin reduces fat mass in the absence of either leptin or leptin receptor signalling, thereby challenging the interdependence between leptin and oxytocin. An oxytocin induced production of the anti-lipolytic prostaglandin E2 (PGE2) might account for this. Media from 3T3-L1 differentiated adipocytes treated with oxytocin (0-50 nmol.L-1) for 24 hrs were assayed for PGE2, leptin, adiponectin, and glycerol. Harvested cells were analysed for lipid droplet triglyceride and cytosolic free fatty acid (FFA) by flow cytometry, and for altered expression of lipolytic and lipogenic associated gene ontology transcripts by cDNA array. Both PGE2 and leptin secretion were significantly increased by oxytocin treatment whilst adiponectin secretion was not. A significant increase in cytosolic FFA was detected following oxytocin treatment, similar to that determined following treatment with isoproterenol (positive control). A significant increase in glycerol release to the culture media confirmed a lipolytic effect. No enrichment of lipolytic and lipogenic associated gene ontology transcripts was determined, but significant overrepresentation of chemosensory olfactory transcripts was. In conclusion, oxytocin stimulates lipolysis in 3T3-L1 adipocytes, mediated by autocrine/paracrine actions of PGE2 and leptin. To confirm that this response is mediated solely by the oxytocin receptor, further experiments would require those effects being blocked by a specific oxytocin antagonist.

The superposition anti-viral activity of porcine tri-subtype interferon expressed by Saccharomyces cerevisiae.

Interferon (IFN)-mediated antiviral responses are central to host defense against viral infection. Porcine viral infection has emerged as a serious hazard for the pig industry. The construction of an engineered Saccharomyces cerevisiae strain that efficiently produces porcine IFN has demonstrated several advantages. It can be easily fed to pigs, which helps in reducing antibiotic residues in pork and improve meat quality. In this study, the stable expression of several porcine IFN molecules (pIFN-α1, pIFN-ß, pIFN-λ1, pIFN-λ1-ß, pIFN-λ1-ß-α1) were determined using an engineered S. cerevisiae system. With the YeastFab assembly method, the complete transcriptional units containing promoter (GPD), secretory peptide (α-mating factor), target gene (IFN) and terminator (ADH1) were successfully constructed using the characteristics of type II restriction endonuclease, and then integrated into the chromosomes Ⅳ and XVI of ST1814 yeast host strain, respectively. The expression kinetics of recombinant pIFNs were further analyzed. Synergism in the expression level of IFN receptor, antiviral protein, and viral loading was observed in viral-cell infection model treated with different porcine IFN subtypes. The porcine reproductive and respiratory syndrome viral load and antibody titer in serum decreased significantly after oral administration of IFN expression yeast fermentation broth. These findings indicate the potential efficacy of multi-valent pIFNs expressing S. cerevisiae as a potent feed material to prevent viral infections of pigs.

Induction of spontaneous phenotype conversion in Ralstonia solanacearum by addition of iron compounds in liquid medium.

Ralstonia solanacearum is a soil-borne pathogen that causes bacterial wilt in plants. The wild-type strain of R. solanacearum undergoes spontaneous phenotype conversion (PC), from a fluidal to non-fluidal colony morphology. PC mutants are non-pathogenic due to reduced virulence factors, and can control wilt diseases as biological control agents. The induction factors of PC in R. solanacearum are currently unclear. Here, we investigated the effect of iron treatment on bacterial growth of wild-type strain and PC mutant, and PC of the wild-type strain in liquid medium. Interestingly, PC was frequently induced in the single cultured wild-type strain by iron treatment; however, PC was not induced in the co-culture. In a co-culture of both strains, the PC mutant showed increased growth compared to the wild-type strain by iron treatment. Furthermore, we investigated the effects of iron treatment on the bacterial growth and PC of the wild-type strain under different culture conditions of medium type (MM broth, BG broth, and water medium), iron compounds, and pH. In BG broth, PC occurred frequently regardless of iron treatment. In MM broth, the optimal conditions for high frequency induction of PC by iron treatments were treatment of iron (III) EDTA, and under pH 7-8. Conversely, PC was not induced by iron treatment in water medium and in MM broth under pH 5 conditions. Common to the culture conditions wherein PC was not induced by iron treatment, the bacterial density of the wild-type strain was as low as 106 CFU mL-1 or less. Finally, we investigated the effects on bacterial growth and PC of the wild-type strain by the iron treatment and addition of culture filtrate after cultivation of the wild-type strain at high concentration. In medium containing only the culture filtrate, PC did not occur. However, in medium containing the culture filtrate and iron, PC occurred frequently. Our results thus suggest that high-density growth of the wild-type strain as well as the presence of iron are involved in inducing PC in R. solanacearum.

The influence of medium composition on the microbial secretory production of hydroxyalkanoate oligomers.

With the aid of a chain transfer (CT) reaction, hydroxyalkanoate (HA) oligomers can be secreted by recombinant Escherichia coli carrying the gene encoding a lactate-polymerizing enzyme (PhaC1PsSTQK) in Luria-Bertani (LB) medium supplemented with a carbon source and CT agent. In this study, HA oligomers were produced through microbial secretion using a mineral-based medium instead of LB medium, and the impact of medium composition on HA oligomer secretion was investigated. The focused targets were medium composition and NaCl concentration related to osmotic conditions. It was observed that 4.21 g/L HA oligomer was secreted by recombinant E. coli in LB medium, but the amount secreted in the mineral-based modified R (MR) medium was negligible. However, when the MR medium was supplemented with 5 g/L yeast extract, 3.75 g/L HA oligomer was secreted. This can be accounted for by the enhanced expression and activity of PhaC1PsSTQK upon supplementation with growth-activated nutrients as supplementation with yeast extract also promoted cell growth and intracellular growth-associated polymer accumulation. Furthermore, upon adding 10 g/L NaCl to the yeast extract-supplemented MR medium, HA oligomer secretion increased to 6.86 g/L, implying that NaCl-induced osmotic pressure promotes HA oligomer secretion. These findings may facilitate the secretory production of HA oligomers using an inexpensive medium.

Biochemical markers for pregnancy in the spent culture medium of in vitro produced bovine embryos†.

The present study aimed to identify biomarkers to assess the quality of in vitro produced (IVP) bovine embryos in the culture media. IVP embryos on Day (D) 5 of development were transferred to individual drops, where they were maintained for the last 48 h of culture. Thereafter, the medium was collected and the embryos were transferred to the recipients. After pregnancy diagnosis, the media were grouped into the pregnant and nonpregnant groups. The metabolic profiles of the media were analyzed via electrospray ionization mass spectrometry, and the concentrations of pyruvate, lactate, and glutamate were assessed using fluorimetry. The spectrometric profile revealed that the media from embryos from the pregnant group presented a higher signal intensity compared to that of the nonpregnant group; the ions 156.13 Da [M + H]+, 444.33 Da [M + H]+, and 305.97 Da [M + H]+ were identified as biomarkers. Spent culture medium from expanded blastocysts (Bx) that established pregnancy had a greater concentration of pyruvate (p = 0.0174) and lesser concentration of lactate (p = 0.042) than spent culture medium from Bx that did not establish pregnancy. Moreover, pyruvate in the culture media of Bx can predict pregnancy with 90.9% sensitivity and 75% specificity. In conclusion, we identified markers in the culture media that helped in assessing the most viable IVP embryos with a greater potential to establish pregnancy.

Canine induced pluripotent stem cell maintenance under feeder-free and chemically-defined conditions.

Canine induced pluripotent stem cells (ciPSCs) provide a platform for regenerative veterinary medicine, disease modeling, and drug discovery. However, in the conventional method, ciPSCs are maintained using chemically-undefined media containing unknown animal components under on-murine embryonic fibroblast feeder conditions, which were reported to modify cell surface of iPSCs and increases the risk of immune rejection when the cells are transplanted into patients. Moreover, in the conventional method, ciPSCs are mechanically passaged, which requires much time and effort. Therefore, the large-scale expansion of ciPSCs is difficult, which should be resolved for using ciPSCs in clinical application and research. Here, it was shown that StemFit® AK02N and iMatrix-511 could maintain the pluripotency of ciPSCs using conventional culture method. Furthermore, it was demonstrated that the feeder-free and chemically-defined ciPSC culture systems using StemFit® AK02N and iMatrix-511 could stably maintain and allow the easy expansion of ciPSCs generated using N2B27 and StemFit® AK02N, without causing karyotype abnormalities. ciPSCs expressed several pluripotency markers and formed teratomas, including cells derived from three germ layers.

Absence of SARS-CoV-2 (COVID-19 virus) within the IVF laboratory using strict patient screening and safety criteria.

RESEARCH QUESTION: Is there a risk of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) viral exposure and potential cross-contamination from follicular fluid, culture media and vitrification solution within the IVF laboratory using strict patient screening and safety measures? DESIGN: This was a prospective clinical study. All women undergoing transvaginal oocyte retrieval were required to have a negative SARS-CoV-2 RNA test 3-5 days prior to the procedure. Male partners were not tested. All cases used intracytoplasmic sperm injection (ICSI). The first tube of follicular fluid aspirated during oocyte retrieval, drops of media following removal of the embryos on day 5, and vitrification solution after blastocyst cryopreservation were analysed for SARS-CoV-2 RNA. RESULTS: In total, medium from 61 patients, vitrification solution from 200 patients and follicular fluid from 300 patients was analysed. All samples were negative for SARS-CoV-2 viral RNA. CONCLUSIONS: With stringent safety protocols in place, including testing of women and symptom-based screening of men, the presence of SARS-CoV-2 RNA was not detected in follicular fluid, medium or vitrification solution. This work demonstrates the possibility of implementing a rapid laboratory screening assay for SARS-CoV-2 and has implications for safe laboratory operations, including cryostorage recommendations.

Embryo morphokinetic score is associated with biomarkers of developmental competence and implantation.

PURPOSE: To study embryo morphokinetics in relation to release in spent media of molecules with possible roles in development and implantation (miR-20a, miR-30c, and sHLA-G). METHODS: Data were obtained from embryos generated in standard IVF and ICSI cycles. The Eeva system was used for embryo assessment, based on early morphokinetic parameters and producing a score (1-5, best-worst) corresponding to higher/medium/lower chances of development to blastocyst. miRNAs - mm miR-20a-5p and miR-30c-5p - and sHLA-G were quantified in 25 µl of spent blastocyst media (SBM) collected before vitrification or transfer. Statistical analyses were performed applying Kolmogorov-Smirnov, Shapiro-Wilk, and Spearman's correlation coefficient tests, where appropriate. RESULTS: SBM were collected from a total of 172 viable blastocysts. Their analysis showed that concentration of miR-20a was progressively lower as Eeva score increased and probability of development to blastocyst decreased (P = 0.016). The opposite trend was observed in the case of miR-30c, i.e., concentration was higher as score increased and chances of development to blastocyst decreased (P = 0.004). Analysis of sHLA-G revealed a negative correlation with Eeva score, i.e., levels were progressively lower as Eeva score increased and probability of development to blastocyst decreased (R = - 0.388, N = 141, P = 0.001). CONCLUSION: Our data suggest that morphokinetic algorithms that predict development to blastocyst stage, in fact, also identify embryos with molecular and cellular profiles more consistent with developmental functions.